Price: $269.95
(as of Nov 05, 2019 10:36:07 UTC – Details)
This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.
NOTE : 11Kw at 220 is equal to 13kw at 240. Lifetime warranty or residential use. Save up to 60% on your water heating costs with the most advanced, self modulating technology available. Dimensions : 11.5 H x 8 W x 3.75 D inches
Never run out of hot water with an ECOSMART tankless water heater.
Save up to 12 cubic feet of storage space. Digital temperature control in 1-degree increments gives users complete control of hot water
11Kw at 220 is equal to 13kw at 240 and activation flow is 0.3 GPM
The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire.